SOLD
Late Model Acasi Trupiston Model Trupiston-8-Servo Piston Filler with an Acasi Model Acasi Trucap-8-Vert Available For Immediate Delivery
One (1) used Acasi Trupiston Model Trupiston-8-Servo Piston Filler. This unit features an 8-head servo-controlled piston filler and is Acasi's most accurate machine. It's a versatile powerhouse, capable of filling a wide range of liquids, from low viscosity to high viscosity, and even with breakable particulates of up to 3/4". It's also equipped for hot fills of up to 200 degrees F. It comes with a 60-gallon double-walled tank to run low-pressure steam or hot water through it, to maintain the product's temperature.
Servo-Driven Piston Filler Includes the following features and options:
- 8-head servo-driven piston filler MODEL ACASI TRUPISTON-8-SERVO
- OSHA compliant guard package with interlocks
- Wash down upgrade - motors, sensors, ball screw motion covered with bellows and sealed, servo motor, HMI with additional covered seal, wash down buttons.
- (8) 50 oz max fill, rotary valve pistons in 316L SS
- (8) 3/4 in. IBSO Drip-free Bottom-up nozzles in 316L SS with sanitary connections
- (8) 3/8 in. IBSO Drip-free Bottom-up nozzles in 316L SS with sanitary connections
- Hot-fill tubing for up to 200 degrees F
- Pneumatic-actuated drip tray controlled via PLC.
- 60 Gallon 304 SS tank with double wall for low pressure steam at 40 psi and agitation with AC motor speed control via HMI
- Product in-feed control via pneumatic-actuated ball valve
- Tank level control via mechanical valve actuated by 5” stainless steel float.
- Pressure switch for electrical circuit connections (electric pump start and stop)
- 10 Ft. Conveyor, 4.5” wide acetyl chain, with speed control installed in filler's control.
- 208V 3-phase | 5CFM @ 80psi
Aftermarket add-ons:
- Specially fabricated CIP spray attachment
- Structural Bolting Attachments (Designed by licensed Structural Engineer)
One (1) used Acasi Trucap-8-Vert, an 8-spindle inline capper, features spring-loaded spindles that follow the contour of the bottle, ensuring a perfect cap every time.
Inline spindle capper with vertical wheel cap feeder includes the following features and options:
- 8-spindle automatic capper with vertical wheel cap feeder.
- OSHA compliant guard package with interlocks.
- Washdown upgrade - washdown motors, ceramic bearings and/or bearing protection caps.
- Pneumatic clutches, set for 8-spindle machines. Includes pressure regulator for each one.
- Additional set of gripper belts with independent adjustment.
- Dial indicators for belt adjustment.
- 13ft Conveyor, 4.5 in. wide acetyl chain, with VFD.
- 208V single-phase | 10CFM @ 80psi.
-
Aftermarket add-ons:
- Structural Bolting Attachments (Designed by licensed Structural Engineer)