Home > Products
Share:

*New* ACASI Model Trupiston-8G-Servo Piston Filler

4828

One (1) *New* ACASI Model Trupiston-8G-Servo Filler

Construction features: 

  • High-precision, electrically-driven ball screw movement, faster and more precise than pneumatic or air over oil systems.
  • Fill and charge speeds can be better controlled and changes performed at any point of the stroke (i.e., to reduce speed at the end of a fill cycle to avoid splashing).
  • Capable of handling breakable particulates up to ¾ in diameter.
  • Reservoir tank mounted directly above rotary valves for direct product feed.
  • Heavy duty 304 stainless steel welded frame construction.
  • FDA approved metallic rotary valves.
  • Minimal air consumption.
  • All contact parts are stainless steel, sanitary, Teflon, Buna and Viton.

 

Control panel features: 

  • Omron PLC for all machine logic functions.
  • AC variable speed control.
  • Front panel mounted bottle counter.
  • Front panel Start and E-STOP for easy access.
  • Fiber optic sensors by Omron standard for container gating.
  • No bottle no fill PLC controlled.

 

Standard features: 

  • Nozzle spacing fully adjustable.
  • Container height adjustment.
  • Nozzle stroke adjustments.
  • Adjustable entry and exit bottle gating cylinders.
  • Works with plastic or glass containers.
  • No change parts needed for various types of containers.
  • Pistons and fill nozzles available in various sizes.
  • Optional sanitary pistons and fittings.

 

Electric and pneumatic requirements: 

  • 220 Volts, 60Hz, 15 Amps.
  • 5 CFM @ 80 psi.
Trupiston-8G-Servo Base filling machine platform (Only)
 $49,355
Rotary valve piston for Trupiston From 4.5oz to 167oz
 From $2325 Ea to $5345 Ea
IBSO Short nozzle Pneumatic tip drip free from(1/4”, 3/8”, 1/2”, 5/8”, 3/4”)
 $400 Ea
IBSO Short nozzle Pneumatic tip, drip free  (1” to   1 1/4”)
 $615 Ea
IBSO Bottom-up nozzle – Pneumatic tip, drip free (1/4”, 3/8”, 1/2”, 5/8”, 3/4”) $535 Ea
IBSO Bottom-up nozzle – Pneumatic tip, drip free (1”) $755 Ea
High-precision, SERVO electrically driven ball screw movement for nozzles (Optional)
 $9,300
PLC controlled, pneumatic driven drip tray $1,165
PLC controlled bottle centering guide, without centering guides $1,745
Centering guides (1 per nozzle) $40 Ea
Mechanical valve actuated by 5 inch stainless steel float - mounted on side of tank – Level control $505
Pneumatic actuated ball valve – Product in-feed control $580
30 Gallon standard height S/S Product tank From $1,860 to $2,325
60 Gallon elevated S/S product tank From $3,085 to $7,965
10 Ft. Conveyor, 4.5 in. wide acetyl chain, with speed control installed on conveyor
 $4,045
Available
Qty: